Rockwell Automation 284D On-Machine ArmorStart Accelerator Toolkit - Manual (Page 158)

158 Publication IASIMP-QS015C-EN-P - August 2011
Appendix A Logix Communication and Controller Configuration
7. Verify that the status of the driver is Running.
8. Click Close.
Load the Controller Firmware Serially
This procedure describes how to load firmware in the controller by using a serial connection.
1. Apply input power to the ControlLogix controller power supply.
2. Launch the ControlFlash software
from the RSLogix 5000 tools menu.
3. Click Next.
4. Select your controller catalog number.
In this example, 1756-L63 is controller
catalog number. The steps to download
other Logix controller firmware is
similar.
5. Click Next.
6. Under AB_DF1-1, select the 1756-L63 controller.
7. Click OK.