Appendix c, Armorstart configuration using 193-dnct device, Before you begin – Rockwell Automation 284D On-Machine ArmorStart Accelerator Toolkit User Manual
Page 177: What you need, Appendix

Publication IASIMP-QS015C-EN-P - August 2011
177
Appendix
C
ArmorStart Configuration Using 193-DNCT Device
In this chapter you will learn how to configure your ArmorStart device by using the 193-DNCT hand-held
device. Some of the things that you can use the 193-DNCT device for include:
• commissioning the ArmorStart distributed motor controller.
• configuring the device parameters.
• programming the motor controller.
• monitoring other devices on a DeviceNet network.
• uploading, storing, and downloading complete device configurations for DeviceNet devices via the
network.
• displaying DeviceNet physical layer diagnostics and network bandwidth statistics.
Refer to Bulletin 193 DeviceNet Configuration Terminal User Manual, publication
information.
Before You Begin
• Complete your system hardware selection (refer to
).
• Complete your system layout and wiring (refer to
).
• Configure your DeviceNet Scanner and ArmorStart devices (refer to
What You Need
• 193-DNCT device.
• ArmorStart Accelerator Toolkit CD
.
• The manual for how to use the 193-DNCT hand-held device.