Rockwell Automation 2727-T7P30D1F MobileView Tablet T750 User Manual - Manual (Page 95)

Publication 2727-UM001D-EN-P - March 2004
Maintenance and Troubleshooting 7-3
Full Reset
Do a full reset when:
•
You want to delete all memory and return to the factory default
settings.
•
A non-recoverable operational problem occurs.
To perform a full reset, follow these steps:
1. Close your applications if possible.
2. Power down the Tablet by pressing and holding the reset button
with the stylus until the screen turns black.
3. To restart the Tablet, press the Enter button.
Errors After a Full Reset
If the hardware is defective or the full reset was not performed
correctly, errors may continue after the full reset. If you suspect the
full reset was not done correctly, repeat the process.
Troubleshooting Be sure to check the following problems and solutions before
contacting Rockwell Automation. See the Preface in this manual for
additional information resources.
IMPORTANT
When a full reset is initiated, all data on the Tablet is
deleted and parameters are reset to their initial
factory default settings. Back up the data if possible
before doing a full reset. Take precautions when
backing up if a memory error has occurred as the
error will also be backed up and could corrupt other
data.