Rockwell Automation 2727-T7P30D1F MobileView Tablet T750 User Manual - Manual (Page 35)

Publication 2727-UM001D-EN-P - March 2004
General Tablet Operation and Configuration 3-11
Button Configuration The MobileView Tablet features configurable buttons including four
Program buttons, Navigational Arrows, Next and Previous buttons,
and Plus and Minus buttons. The buttons can be reprogrammed by
changing the Buttons settings in the Control Panel as described on the
following pages. The default button responses are shown below.
Default Button Operation
Button Symbol Description
Opens terminal server client (configurable).
Opens wireless link status (configurable).
Opens on-screen keyboard (configurable).
Opens Windows Explorer (configurable).
Navigational Arrow Buttons: The navigational
buttons can move the current selection up, down,
left, or right. Pressing the left and right arrow
buttons simultaneously performs the same function
as pressing the Esc (Escape) key on a computer
keyboard.
Start/Enter Button: Press this button to power up
the MobileView Tablet T750 after it has been
powered down or to enter an active selection.
N/A Notification LEDs: The LEDs can glow green, yellow
or red. They are programmable and can be used to
notify the user of an event, such as a low battery
warning.
Next and Previous Buttons: The next and previous
buttons are programmed to move to the next or
previous selection (configurable).
Plus and Minus Buttons: The plus (+) and minus (-)
buttons operate similar to the same PC keyboard
buttons depending on the context of current active
application (configurable).