Rockwell Automation 2727-T7P30D1F MobileView Tablet T750 User Manual - Manual (Page 79)

Publication 2727-UM001D-EN-P - March 2004
Communications Configuration 5-25
Tablet Communication Settings
Follow these steps to verify or change the serial communications
settings on the Tablet:
1. Tap on the Start button and select Settings, Control Panel from
the menu.
2. Double-tap the Communications icon to open the
Communications Properties dialog box.
3. Tap the PC Connection tab.
4. Make sure the “Allow connection with desktop computer when
device is attached” check box is checked.
5. The default for “Connect Using” is Desktop @ 115200. Tap the
Change button and change the setting if necessary.
6. Tap OK button at the top of the dialog box to save changes and
close.
Change
button
Tabs Tabs
Check Box
TIP
You may also communicate to a PC with a WIN CE
IrDA compliant infrared port. Tap the Change button
and select IrDA from the Change Connection drop
down menu.