Rockwell Automation 2727-T7P30D1F MobileView Tablet T750 User Manual - Manual (Page 21)

Publication 2727-UM001D-EN-P - March 2004
Quick Start 2-5
Wireless Adapter Setup
To communicate successfully, the internal Cisco wireless LAN adapter
properties must be set to match your server’s wireless LAN adapter or
wireless access points properties.
To set internal Cisco wireless LAN adapter properties:
1. Tap the Start button on the task bar.
2. Select Programs and then the Wireless Utilities folder.
3. Tap Cisco Setup selection to activate setup window.
4. Enter the appropriate property selections and values. Use the
on-screen keyboard shown above to enter alphanumeric
characters where needed. On-screen keyboard can be accessed
by taping the keyboard icon on the task bar.
See Chapter 5 for more detailed information on the property
settings for the client adapter.
Confirming Wireless Link
Once RF network configuration is completed and PC wireless LAN
adapter or wireless access points are enabled, follow the steps below
to confirm wireless link.
IMPORTANT
Do not press and hold in the reset button for more
than a second or you will start a full reset where all
data on the Tablet is deleted and parameters are
reset to their initial default settings.