Rockwell Automation 2727-T7P30D1F MobileView Tablet T750 User Manual - Manual (Page 51)

Publication 2727-UM001D-EN-P - March 2004
Power Management 4-7
Replacing the Main Battery Pack
To replace the main battery pack, follow these steps:
1. Slide battery cover plate down (about
one-eight of an inch).
2. Remove the battery by sliding the
battery (and the cover plate) towards
you (away from the case) until the
battery is completely removed from
the case.
3. Slide the battery into the battery
compartment until the battery cover
plate is flush with the Tablet case, then
slide the cover plate up. You should
feel the battery snap into place.
IMPORTANT
The internal backup battery maintains power to
retain your data for up to two minutes if the main
battery pack is removed or runs out of power. To
avoid losing data, files, or registry settings, save
registry settings files and data to the storage card,
connect to an external power source and recharge or
replace the main battery pack immediately. See
Using the AC Power Adapter/Battery Charger on
page 4-5. See Saving Registry Settings and Storage
Card Operations in 3.
IMPORTANT
The internal backup battery is not replaceable. It
charges automatically when the Tablet is connected
to AC power.