Rockwell Automation 2727-T7P30D1F MobileView Tablet T750 User Manual - Manual (Page 10)

Publication 2727-UM001D-EN-P - March 2004
Preface 4
Cet appareil numerique de la classe B respecte les exigences du
Reglement sur le material broilleur du Canad.
This device complies with Class B Limits of Industry Canada.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
The device is certified to the requirements of RS-139-1 and RSS-210 for
2.4 GHz spread spectrum devices. The use of this device in a system
operating either partially of completely outdoors may require the user
to obtain a license for the system according to the Canadian
regulations. For further information, contact your local Industry
Canada office.
European Telecommunications Standards Institute
Statement of Compliance
Information to User
This equipment has been tested and found to comply with the R&TTE
Directive as follows:
For units with Cisco Air-LMC 340 Series radios
Radio: ETS 300.328
EMC: ETS 300.826
Safety: EN 60950
For units with Cisco Air-LMC 350 Series radios
Radio: EN 300.328-1, EN 300.328-2
EMC: EN 301.489-1, EN 301-489-17
Safety: EN 60950
This type of accepted equipment is designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy, and if not installed and
used in accordance with the installation instructions, may cause
harmful interference to radio communications.