beautypg.com

Using the ac adapter/charger -2, Using the ac adapter/charger – Rockwell Automation 2727-T7P30D1F MobileView Tablet T750 User Manual User Manual

Page 18

background image

Publication 2727-UM001D-EN-P - March 2004

2-2 Quick Start

If the battery level is sufficient enough, the following power-up screen
should appear.

If power-up screen does not appear, connect the MobileView Tablet
to the ac adapter/charger to operate on ac power and charge the
battery.

Using the AC Adapter/Charger

Plug the jack end of the cable from the AC
adapter into the charger port as shown. The
battery will recharge when connected to
external power.

IMPORTANT

Use only the AC Adapter supplied with your
MobileView Tablet. Using another type of
adapter may cause a malfunction or damage the
battery pack.

See also other documents in the category Rockwell Automation Equipment: