Rockwell Automation 2727-T7P30D1F MobileView Tablet T750 User Manual - Manual (Page 94)

Publication 2727-UM001D-EN-P - March 2004
7-2 Maintenance and Troubleshooting
Storing the MobileView Tablet
Store the Tablet in an area that meets the following requirements:
•
The storage area should be free of vibration and magnetic fields.
•
The storage area should not expose the Tablet to solvents or
corrosive gases.
•
The storage temperatures should be from -5°C to +60°C (+23°F
to +140°F).
•
The storage humidity should be from +5 to +95%
non-condensing.
Soft Reset Doing a soft reset will delete any data that is in the process of being
input or edited and was not saved before the reset. All the settings
and the data stored in memory will be retained.
Do a soft reset whenever the MobileView Tablet fails to operate
correctly because of an operational error or some other problem. If
the soft reset does not resolve the problem, a full reset may be
necessary.
To do a soft reset, use the stylus to press and quickly release the
Tablet’s Reset button.
IMPORTANT
Do not use detergents or other harsh cleaning
additives on the touch screen.
IMPORTANT
Do not press and hold in the reset button for more
than a second or you will start a full reset where all
data is deleted and parameters are reset to their
initial default settings.
Bottom View
Reset Button