Rockwell Automation 2727-T7P30D1F MobileView Tablet T750 User Manual - Manual (Page 72)

Publication 2727-UM001D-EN-P - March 2004
5-18 Communications Configuration
4. Click the Transmit Key button to the left of the key you want to
use to transmit packets. Only one WEP key can be selected as
the transmit key.
5. Click OK to write your WEP key(s) to the client adapter’s volatile
memory and the Windows CE registry and to exit the utility or
click Cancel to exit the utility without updating the keys.
6. Double-click the Cisco ACU icon or select
Start/Programs/Cisco/Aironet Client Utility. The ACU screen
appears.
7. Select WEP under Property. Select Enabled from the list of
options in the Value box to enable static WEP.
8. Click OK to save your changes and to exit the utility.
Overwriting an Existing Static WEP Key
Follow the steps below to overwrite an existing static WEP key.
1. If you entered the password correctly in the Enter Password
screen, the CEM screen appears.
A checkmark appears in the Already Set? box for all existing
static WEP keys.