Rockwell Automation 2727-T7P30D1F MobileView Tablet T750 User Manual - Manual (Page 20)

Publication 2727-UM001D-EN-P - March 2004
2-4 Quick Start
4. Select Cisco Wireless LAN Adapter from the list of drivers, then
tap the Properties button.
5. Tap the IP address tab and select either “Obtain an IP address
via DHCP” or “Specify an IP address”, depending on your
network configuration. If you select to specify an IP address,
you need to fill out the information in the three text boxes with
information from your network administrator or ISP.
Use the on-screen keyboard to enter the text. The on-screen
keyboard is accessed by taping the keyboard icon on the task
bar.
6. Tap OK in the settings dialog box. A notification appears,
informing you that you will need to either remove and reinstall
your card or restart the computer for your new settings to take
effect. Tap OK.
7. Tap OK in the Network Configuration dialog box.
8. Press and quickly release the Reset button with the stylus to
restart the Tablet.
Selected RF
Network Driver
Properties button
Adapters tab
DHCP option
selected
(1) Must be a unique address from all others on the LAN.
(2) Must be identical to the server subnet mask.
(1)
(2)
(3)