Rockwell Automation 2727-T7P30D1F MobileView Tablet T750 User Manual - Manual (Page 45)

1 Publication 2727-UM001D-EN-P - March 2004
Chapter
4
Power Management
Introduction Keeping the MobileView Tablet supplied with power is extremely
important. The data, customized settings, and files you save on the
Tablet are stored in RAM. If the power is not managed properly,
stored information may be lost.
Tablet settings and files may also be saved to the Flash storage card to
avoid loss during a power failure. See 3 for more information.
If the Tablet detects a power fault during operation, it performs a
graceful shutdown. The internal backup battery maintains power to
retain your data for up to two minutes if the main battery pack is
removed or runs out of power. To avoid losing data, connect to an
external power source and recharge the battery or replace the main
battery pack as soon as possible. You can recharge the battery as
instructed on page 4-5. You can also remove and replace the battery
pack with a fully charged battery as instructed in Replacing the Main
Battery Pack on page 4-7.
TIP
The Windows CE operating system and standard
programs installed on the Tablet are stored in Flash
Memory and cannot be erased or lost.