Rockwell Automation 2727-T7P30D1F MobileView Tablet T750 User Manual - Manual (Page 26)

Publication 2727-UM001D-EN-P - March 2004
3-2 General Tablet Operation and Configuration
If the battery level is sufficient enough, the following power-up screen
should appear.
If power-up screen does not appear, connect the MobileView Tablet
to the ac adapter/charger to operate on ac power and charge the
battery.
Using the AC Adapter/Charger
Plug the jack end of the cable from the AC
adapter into the charger port as shown. The
battery will recharge when connected to
external power.
Power Save Reactivation
The MobileView Tablet T750 also includes a battery power saving
feature that suspends Tablet operations, including screen operations,
if Tablet is idle beyond suspend timer setting. The default setting is 5
minutes. To reactivate Tablet, press any of the program, navigational,
IMPORTANT
Use only the AC Adapter
supplied with your MobileView
Tablet. Using another type of
adapter may cause a
malfunction or damage the
battery pack.