Rockwell Automation 2727-T7P30D1F MobileView Tablet T750 User Manual - Manual (Page 73)

Publication 2727-UM001D-EN-P - March 2004
Communications Configuration 5-19
2. Decide which existing static WEP key you want to overwrite.
3. Click within the blank field of that key.
4. Enter a new key, following the guidelines outlined in Step 3 of
the “Entering a New Static WEP Key and Enabling Static WEP”
section on page 4.7.
5. Make sure the Transmit Key button to the left of your key is
selected, if you want this key to be used to transmit packets.
6. Click OK to write your new static WEP key to the client
adapter’s volatile memory and the Windows CE registry and to
exit the utility or click Cancel to exit the utility without
overwriting any keys.
7. Open ACU and make sure WEP is enabled.
Changing the CEM Password
Follow the steps below if you want to change the password that
allows you to access CEM.
1. Double-click the Cisco CEM icon or select
Start/Programs/Cisco/Client Encryption Manager.
2. Enter the correct password in the Enter Password screen and
click OK. The CEM screen appears.
TIP
For security reasons, the codes for existing
static WEP keys do not appear on the screen.
Also, you can write over existing keys, but you
cannot edit or delete them.
TIP
For security reasons, Cisco recommends that you
change the default password.