Rockwell Automation 2727-T7P30D1F MobileView Tablet T750 User Manual - Manual (Page 69)

Publication 2727-UM001D-EN-P - March 2004
Communications Configuration 5-15
Using Static WEP This section provides instructions for entering new static WEP keys or
overwriting existing static WEP keys. Follow the procedures in the
order listed below:
1. Open CEM; see below
2. View the client adapter’s current static WEP key settings; see
page 5-16
3. Perform one of the following:
– Enter a new static WEP key and enable WEP; see page 5-17
– Overwrite an existing static WEP key; see page 5-18
4. Change the CEM password (optional); see page 5-19
Opening CEM
Follow the steps below to open CEM.
1. Double-click the Cisco CEM icon or select
Start/Programs/Cisco/Client Encryption Manager. The Enter
password screen appears, provided client adapter is installed in
the Windows CE device and is running.
2. Enter the correct password in the Password field and click OK.
Passwords are case sensitive and can contain up to 256
alphanumeric characters. The default password is Cisco
(uppercase C followed by lowercase isco). For security reasons,
the characters you enter are displayed as asterisks.
TIP
Refer to the “Changing the CEM Password”
section on page 5-19 for instructions on
changing the default password.