Rockwell Automation 1336Z SPIDER - FRN 2.xxx-5.xxx - Manual (Page 163)

Appendix
C
CE Conformity
Low Voltage Directive
The following low voltage directives apply:
•
EN 60204-1
• EN 50178
EMC Directive
This drive (complex component) is tested to meet Council Directive
89/336 Electromagnetic Compatibility (EMC) using the following
standards:
•
EN 50081-1, -2 - Generic Emission Standard
• EN 50082-1, -2 - Generic Immunity Standard
• EN 61800-3 - Standard for Adjustable Speed Electrical Power
Drive Systems
Declarations of Conformity to the European Union Directives are
available. Please contact your Allen-Bradley Sales Representative.
1 Note: Installation guidelines stated below must be adhered to.
Important: The drive is tested in an EMC approved cabinet to reach
Emission Standard EN 50081-1. Without a cabinet, the
drive will be under EN 50081-2. The conformity of the
drive and filter to any standard does not guarantee that the
entire installation will conform. Many other factors can
influence the total installation and only direct
measurements can verify total conformity.
Marked for all applicable directives 1
Product Standard EN 61800-3
EN 50081-2
Emissions EN 50081-1
EN 50081-2
EN 55011 Class A
EN 55011 Class B
Immunity EN 50082-1
EN 50082-2
IEC 801-1, 2, 3, 4, 6, 8 per EN 50082-1, 2
!
ATTENTION: The operation of AC drives in the
European market is only permitted if the Council Directive
Electromagnetic Compatibility 89/336/EWG has been
observed.
It is the responsibility of the manufacturer of the machine
or system to observe the immunity and emission limits,
requested by the Council Directive EMC in the European
market. Guidelines for the installation according to EMC
regulations such as shielding, grounding, filter arrange-
ment as well as wiring instructions are summarized in this
User Manual.