Rockwell Automation 284E ArmorStart with EtherNet/IP - User Manual - Manual (Page 79)

Rockwell Automation Publication 280E-UM001B-EN-P - July 2012 79
Chapter
5
Adding an ArmorStart to RSLogix 5000
Setup This section will show you how to add an ArmorStart Add-On-Profile (AOP) to
RSLogix 5000. It is assumed that you have downloaded and installed the AOP so
that the RSLogix 5000 software can fully support the ArmorStart Ethernet/IP.
The AOP can be downloaded from:
http://support.rockwellautomation.com/
controlflash/LogixProfiler.asp .
1. Open RSLogix 5000 by double-clicking on the icon on your desktop.
2. Select File>New to create a new project.