Rockwell Automation 284E ArmorStart with EtherNet/IP - User Manual - Manual (Page 325)

Rockwell Automation Publication 280E-UM001B-EN-P – July 2012 325
Using DeviceLogix Appendix C
Bulletin 284 ArmorStart Produced Network Bits
The screen capture below shows how to choose Produced Network Bits in the
ladder editor.
The following table contains the produced network bit definitions for Bulletin
284 ArmorStart units
0
Produce network bit declaration
0 = Net Output 0
1 = Net Output 1
2 = Net Output 2
3 = Net Output 3
4 = Net Output 4
5 = Net Output 5
6 = Net Output 6
7 = Net Output 7
8 = Net Output 8
9 = Net Output 9
10 = Net Output 10
11 = Net Output 11
12 = Net Output 12
13 = Net Output 13
14 = Net Output 14
15 = Fault Reset
16 = Accel 1
17 = Accel 2
18 = Decel 1
19 = Decel 2
20 = Freq Select 1
21 = Freq Select 2
22 = Freq Select 3
23 = Motion Disable
24 = Keypad Disable