Rockwell Automation 284E ArmorStart with EtherNet/IP - User Manual User Manual
Page 258
258
Rockwell Automation Publication 280E-UM001B-EN-P - July 2012
Chapter 12 Accessories
Description
Thomas & Betts
Part No.
Recommended Cord Grips
Thomas & Betts Cord Grip
Cord grips for ArmorStart devices with 10 A short circuit protection rating
1 in. Stain Relief Cord Connector, 1 in. Lock Nut
Cable Range: 0.31…0.56 in.
Used with Control Power Media
Cordset – Example: Cat. No. 889N-M65GF-M2
2931NM
Thomas & Betts Cord Grip
Cord grips for ArmorStart devices with 10 A short circuit protection rating
3/4 in. Stain Relief Cord Connector, 3/4 in. Lock Nut
Cable Range: 0.31…0.56 in.
Used with Three-Phase Power
Media Cordset – Example: Cat. No. 280-PWR22G-M1
2940NM
Thomas & Betts Cord Grip
Cord grips for ArmorStart devices with 25 A short circuit protection rating
1 in. Stain Relief Cord Connector, 1 in. Lock Nut
Cable Range: 0.31…0.56 in.
Used with Control Power Media
Cordset – Example: Cat. No. 889N-M65GF-M2
2931NM
Thomas & Betts Cord Grip
Cord grips for ArmorStart devices with 25 A short circuit protection rating
3/4 in. Stain Relief Cord Connector, 3/4 in. Lock Nut
Cable Range: 0.31…0.56 in.
Used with Three-Phase Power
Media Cordset – Example: Cat. No. 280-PWR22G-M1
2942NM