beautypg.com

Rockwell Automation 284E ArmorStart with EtherNet/IP - User Manual User Manual

Page 187

background image

Rockwell Automation Publication 280E-UM001B-EN-P – July 2012

187

Bulletin 280E/281E/284E Programmable Parameters Chapter 7

Parameters 240…247 are only active if Parameter 138 (Speed Reference) is set
to “6” (StpLogic).

These parameters can be used to create a custom profile of frequency commands.
Each step can be based on time, status of a Logic input, or a combination of time
and the status of a Logic input.

Digits 0…3 for each (StpLogic x) parameter must be programmed according
to the desired profile. Refer to Tables 25, 26 and 27.

A Logic input is established by setting a digital input, Parameters 151…154
(Digital In x Sel), to 23 (Logic In1) and/or 24 (Logic In2).

A time interval between steps can be programmed using Parameters 250…257
(StpLogic Time x). See Table 24 for related parameters.

The speed for any step is programmed using Parameters 170…177 (Preset Freq x).

StpLogic 0 (240) (see Table 25)
StpLogic 1 (241) (see Table 25)
StpLogic 2 (242) (see Table 26)
StpLogic 3 (243) (see Table 27)

StpLogic 4 (244)
StpLogic 5 (245)
StpLogic 6 (246)
StpLogic 7 (247)

Stop drive before changing this parameter.

Parameter Number

240…247

Access Rule

GET/SET

Data Type

UINT

Group

Drive Advanced Setup

Units

Minimum Value

0001

Maximum Value

baFF

Default Value

00F1

Table 24 - Parameters 240…257

StepLogic Parameter (Active

when

138 = 6 (StpLogic))

Related Preset Frequency

Parameter (Can be

activated independent of

StepLogic Parameters)

Related StepLogic Time Parameter

(Active when 240…247 Digit 0 or 1

are

set to 1, b, C, d, or E)

240 (StpLogic 0)

170 (Preset Freq 0)

250 (StpLogic Time 0)

241 (StpLogic 1)

171 (Preset Freq 1)

251 (StpLogic Time 1)

242 (StpLogic 2)

172 (Preset Freq 2)

252 (StpLogic Time 2)

243 (StpLogic 3)

173 (Preset Freq 3)

253 (StpLogic Time 3)

244 (StpLogic 4)

174 (Preset Freq 4)

254 (StpLogic Time 4)

245 (StpLogic 5)

175 (Preset Freq 5)

255 (StpLogic Time 5)

246 (StpLogic 6)

176 (Preset Freq 6)

256 (StpLogic Time 6)

247 (StpLogic 7)

177 (Preset Freq 7)

257 (StpLogic Time 7)