Rockwell Automation 284E ArmorStart with EtherNet/IP - User Manual - Manual (Page 303)

Rockwell Automation Publication 280E-UM001B-EN-P – July 2012 303
CIP Information Appendix B
Interface Object CLASS CODE 0x00B4
The following class attribute are supported.
A single instance (Instance 1) of the Interface Object is supported with the
following instance attributes.
The following common services are implemented for the Interface Object.
Attribute ID Access Rule Name Data Type Value
1 Get Revision UINT
1 for DOL
2 for Inverters
Attribute ID Access Rule Name Data Type Min/Max Default Description
7 Get/Set Prod Assy Word 0
USINT (rev 1)
UINT (rev 2)
— 1 Defines Word 0 of Assy 120
8 Get/Set Prod Assy Word 1
USINT (rev 1)
UINT (rev 2)
— 5 Defines Word 1 of Assy 120
9 Get/Set Prod Assy Word 2
USINT (rev 1)
UINT (rev 2)
— 6 Defines Word 2 of Assy 120
10 Get/Set Prod Assy Word 3
USINT (rev 1)
UINT (rev 2)
— 7 Defines Word 3 of Assy 120
13 Get/Set Starter COS Mask WORD 0 - 0xFFFF 0xFFFF Change of state mask for starter bits
15 Get/Set Autobaud Enable BOOL 0 - 1 1 1= enabled, 0 = disabled
16 Get/Set Consumed Assy USINT 0 to 185 160 (drive 164)
3, 160, 162, 182, 187 (also for drives 164, 166, 170 and
188)
17 Get/Set Produced Assy USINT 100 to 187 161 (drive 165)
52, 120, 161, 163, 181…187 (also for drives 165, 167
and 171) 189, 190
19 Get/Set Set To Defaults BOOL 0 to 1 0 0 = No action, 1 = Reset
23 Get I/O Produced Size — 0 t0 20 — —
24 Get I/O Consumed Size USINT 0 to 16 — —
30 Get DNet Voltage UINT — — DeviceNet Voltage
50 Get/Set PNB COS Mask WORD 0 to 0x00FF 0 Change of state mask for PNBs
64 Get/Set Unlock Identity USINT — 0
Multiple Identity Object instances are unlocked when
this attribute is set to the value 0x99.
Service Code
Implemented for:
Service Name Class Instance
0x0E No Yes Get_Attribute_Single
0x10 No Yes Set_Attribute_Single