Rockwell Automation 20-COMM-ER 20-COMM-ER Dual-Port EtherNet/IP Communication Adapter User Manual - Manual (Page 7)

Rockwell Automation Publication 20COMM-UM015B-EN-P - June 2013 7
Preface
About This Manual
This manual provides information about the adapter and using it with PowerFlex
7-Class (Architecture-Class) drives or Bulletin 150 SMC Soft Starters. The
adapter can be used with other products that support a DPI™ adapter, such as the
DPI External Comms Kit (20-XCOMM-DC-BASE). See the documentation
for your product for specific information about how it works with the adapter.
Conventions Used in This
Manual
The following conventions are used throughout this manual:
• Parameter names are shown in the format Parameter xx - [*]. The xx
represents the parameter number. The * represents the parameter name—
for example Parameter 01 - [DPI Port].
• Menu commands are shown in bold type face and follow the format
Menu > Command. For example, if you read ‘Select File > Open’, you
should click the File menu and then click the Open command.
• The firmware revision number (FRN) is displayed as FRN X.xxx, where
‘X’ is the major revision number and ‘xxx’ is the minor revision number.
• The screen images in this manual resulted from using the following
software:
– RSLinx
®
Classic software, version 2.51
– RSLogix 5000 software, version 16
Different versions of the software may have screens that vary in
appearance, and differences in procedures.
Rockwell Automation
Support
Rockwell Automation offers support services worldwide, with over 75 sales and
support offices, over 500 authorized distributors, and over 250 authorized
systems integrators located through the United States alone. In addition,
Rockwell Automation representatives are in every major country in the world.
Local Product Support
Contact your local Rockwell Automation representative for the following:
• Sales and order support
• Product technical training
Topic Page
Conventions Used in This Manual 7
Rockwell Automation Support 7
Additional Resources 8