Rockwell Automation 20-COMM-ER 20-COMM-ER Dual-Port EtherNet/IP Communication Adapter User Manual - Manual (Page 156)

156 Rockwell Automation Publication 20COMM-UM015B-EN-P - July 2013
Chapter 8 Viewing the Adapter Web Pages
Process Display Home
Page
The Process Display pop-up window dynamically shows the host drive’s
information. To view this window, click the ‘Process display’ link in the
navigation pane.
Figure 81 - Example of Process Display Pop-up Window
Browse DPI Device Folder
This folder gives access to the databases, fault and alarm queues and diagnostic
data (if applicable) to all the devices connected to the DPI network.
Each Device on the DPI network has its own folder that has links to module
information, parameters, diagnostic information, fault queues and alarm queue.
The Parameters are further organized into the DPI groups defined for the specific
device.
Figure 82 shows an example of an SMC-50 device acting as the DPI host on port
0 of the DPI network.
Figure 82 - Example of an SMC-50 Controller Acting as DPI Host
Parameters for the SMC-50 can be changed via the parameters web page by
clicking on the Edit button near the bottom of the web page and entering the
correct username and password when the authorization pop up window appears.