Rockwell Automation 20-COMM-ER 20-COMM-ER Dual-Port EtherNet/IP Communication Adapter User Manual User Manual
Page 179

Rockwell Automation Publication 20COMM-UM015B-EN-P - July 2013
179
Adapter Parameters Appendix B
51
52
[Peer A Output]
[Peer B Output]
Selects the source of the peer I/O output data. The
adapter transmits this data to the network.
Important: Changes to these parameters are
ignored when Parameter 53 - [Peer Out Enable]
is set to ‘1’ (On).
Default:
0 = Off
Default:
0 = Off
Values:
0 = Off
1 = Cmd/Ref
2 = Datalink A Input
3 = Datalink B Input
4 = Datalink C Input
5 = Datalink D Input
6 = Datalink A Output
7 = Datalink B Output
8 = Datalink C Output
9 = Datalink D Output
Type:
Read/Write
Reset Required: No
53
[Peer Out Enable]
Determines if peer I/O output is on or off.
Default:
0 = Off
Values:
0 = Off
1 = On
Type:
Read/Write
Reset Required: No
54
[Peer Out Time]
Sets the minimum time that an adapter will wait
when transmitting data to a peer.
Important: Changes to these parameters are
ignored when Parameter 53 - [Peer Out Enable]
is set to ‘1’ (On).
Default:
10.00 Seconds
Minimum:
0.01 Seconds
Maximum:
10.00 Seconds
Type:
Read/Write
Reset Required: No
55
[Peer Out Skip]
Sets the maximum time that an adapter will wait
when transmitting data to a peer. The value of
Parameter 54 - [Peer Out Time] is multiplied by
the value of this parameter to set the time.
Important: Changes to these parameters are
ignored when Parameter 53 - [Peer Out Enable]
is set to ‘1’ (On).
Default:
1
Minimum:
1
Maximum:
16
Type:
Read/Write
Reset Required: No
56
[Web Enable]
Displays the setting of the adapter Web Pages
Switch (SW2) when the adapter was last reset.
Default:
0 = Disabled
Values:
0 = Disabled
1 = Enabled
Type:
Read Only
57
[Web Features]
Sets the access to the Web interface and Web
configurable email notification feature.
Default:
xxxx xxx0
Bit Values:
0 = Disabled
1 = Enabled
Type:
Read/Write
Reset Required: No
Parameter
No. Name and Description
Details
Bit
Definition
Not
Used
Not
Used
Not
Used
Not
Used
Not
Used
Not
Used
Not
Used
E-m
ail
Cfg
Default
x
x
x
x
x
x
x
1
Bit
7 6 5 4 3 2 1 0