Rockwell Automation 20-COMM-ER 20-COMM-ER Dual-Port EtherNet/IP Communication Adapter User Manual - Manual (Page 212)

212 Rockwell Automation Publication 20COMM-UM015B-EN-P - July 2013
Appendix C EtherNet/IP Objects
Class Attributes
Instance Attributes
Attribute ID Access Rule Name Data Type Description
1 Get Revision WORD The revision of this object
Attribute ID Access Rule Name Data Type Description
1 Get Status of TCP/IP
Network Interface DWORD
2 Get Configuration
Capability DWORD 0x000000F4
3 Get/Set Configuration
Control DWORD 0 = Configuration from NVS
2 = Configuration from DHCP
4 Get Physical Link Object STRUCT of:
UINT
Padded EPATH 2 words
20 F6 24 01 (Enet Link Object instance 1)
5 Get/Set Interface
Configuration STRUCT of:
UDINT
UDINT
UDINT
UDINT
UDINT
STRING IP Address
Network Mask
Gateway Address
Primary DNS
Secondary DNS
Default Domain Name for not fully qualified host names
6 Get/Set Host Name STRING Host name when using DHCP
8 Get/Set TTL Value USINT Time to Live value for EtherNet/IP multicast packets
9 Get/Set Multicast Config Struct of:
USINT
USINT
UINT
UDINT
Allocation Control
Reserved
Number of multicast addresses to allocate (1-4)
Multicast starting address.
10 Get/Set SelectAcd BOOL Activates the use of ACD
11 LastConflictDetected Struct of:
USINT
USINT[6]
USINT[28] AcdActivity
RemoteMAC
ArpPdu