Integral keypad, Integral keypad -3 – Rockwell Automation 22C PowerFlex 400 AC Drive FRN 1.xx - 7.xx User Manual

Page 51

Start Up

2-3

Publication 22C-UM001I-EN-P

Operator Keys

Integral Keypad

Key

Name

Description

Escape

Back one step in programming menu.
Cancel a change to a parameter value and exit Program
Mode.

Select

Advance one step in programming menu.
Select a digit when viewing parameter value.

Up Arrow
Down Arrow

Scroll through groups and parameters.
Increase/decrease the value of a flashing digit.

Enter

Advance one step in programming menu.
Save a change to a parameter value.

Digital Speed
Increment and
Decrement Arrows

Used to control speed of drive. Default is active.
Control is activated by parameter

[Speed Reference] or

[Auto Mode].

Run/Start & Hand

(1)

Used to start the drive. Default is Hand mode as controlled by
parameter P042 [Auto Mode].
Control is activated by parameter

[Start Source] or

[Auto Mode].

Auto

Used to select Auto control mode.
Controlled by parameter

[Auto Mode].

Stop/Off

Used to stop the drive or clear a fault.
This key is always active.
Controlled by parameter

[Stop Mode].

(1)

Important: Certain digital input settings can override drive operation. Refer to

for details.