Lenze PLC Designer R3-x - Manual (Page 9)

Lenze · Commissioning of Lenze drives · 1.3 EN - 06/2014
9
About this documentation
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Further technical documentation on Lenze products
Further information on Lenze products which can be used in connection with Controller-based
Automation can be found in the following documentation:
Further information on Lenze products which can be used in connection with Controller-based
Automation can be found in the following documentation:
Target group
This documentation addresses to all persons who plan, commission, and program a Lenze
automation system on the basis of the Lenze "ApplicationTemplate PackML" as part of the
"Controller-based Automation".
Screenshots/application examples
All screenshots in this documentation are application samples. Depending on the firmware version
of the Lenze devices and the software version of the engineering tools installed (here: »PLC
Designer«), the screenshots may differ from the real screen display.
Mounting & wiring Icons
 Mounting instructions
• Controller
• Communication cards (MC-xxx)
• I/O system 1000 (EPM-Sxxx)
• Inverter
• Communication modules


Printed documentation
Online help in the Lenze Engineering
tool/
software manuals and communication
manuals are provided as PDF files in
the download area of the Lenze
website.
Using sample application/application template

Online help/software manuals
• i700 Application Sample
• Application samples
Inverter Drives 8400/Servo Drives 9400
• ApplicationTemplate
• ApplicationTemplate PackML
Parameterisation, configuration, commissioning

Online help/software manuals
• Controller
• i700 servo inverter
• Servo Drives 9400 HighLine/PLC/
regenerative power supply module
• Inverter Drives 8400 StateLine/HighLine/TopLine
• 1000 I/O system (EPM-Sxxx)
 Online help/communication manuals
• Bus systems
• Communication modules