Lenze PLC Designer R3-x - Manual (Page 151)

Lenze · Commissioning of Lenze drives · 1.3 EN - 06/2014
151
Automatically generated functions
GetBooleanProperty (automatically generated by »PLC Designer«)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
14 Automatically generated functions
This section contains detailed information on functions that are generated automatically by the
»PLC Designer«. The output values can be found under: ProjectProject information
14.1 GetBooleanProperty (automatically generated by »PLC Designer«)
The function provides boolean project information of the library. (Currently no boolean project
information is used).
Inputs
Outputs

Note!
This function must always be used with the corresponding name area of the related
library. (for instance L_DAC.GetNumberProperty(stKey))
GetBooleanProperty
WSTRING ⎯ stKey GetBooleanProperty ⎯ BOOL
Identifier/data type Information/possible settings
stKey
WSTRING
Key of the project information
Identifier/data type Information/possible settings
GetBooleanProperty
BOOL
Value of the project information