Lenze PLC Designer R3-x - Manual (Page 100)

The L_DCO_DriveCommunication library
Overview of the functions and function blocks
100
Lenze · Commissioning of Lenze drives · 1.3 EN - 06/2014
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
12 The L_DCO_DriveCommunication library
This library contains function blocks for parameter processing.
12.1 Overview of the functions and function blocks
The functions and function blocks of the L_DCO_DriveCommunication library are divided into
different groups.

Note!
The functions/function blocks contained in this library can be used with the following
devices:  Overview of device descriptions ( 62)
 GetBooleanProperty (automatically generated by »PLC Designer«) ( 151)
 GetCompany (automatically generated by »PLC Designer«) ( 152)
 GetNumberProperty (automatically generated by »PLC Designer«) ( 152)
 GetTextProperty (automatically generated by »PLC Designer«) ( 153)
 GetTitle (automatically generated by »PLC Designer«) ( 154)
 GetVersion (automatically generated by »PLC Designer«) ( 154)
 GetVersionProperty (automatically generated by »PLC Designer«) ( 155)
Enums
 L_DCO_CommState ( 101)
 L_DCO_Error ( 101)
Function Blocks
DriveInterface
 L_DCO_AXIS_REF_BASE ( 104)
SDO Communication
 L_DCO_ReadDriveParameter ( 105)
 L_DCO_ReadDriveParameterString ( 106)
 L_DCO_TransferDriveParameter ( 107)
 L_DCO_WriteDriveParameter ( 110)
Structs
 L_DCO_SDOData ( 111)
 L_DCO_TransferData ( 112)
Unions
 L_DCO_ConvertData ( 112)