4 l_lcb_axis_ref_can (internal use), 5 l_lcb_axis_ref_etc (internal use), L_lcb_axis_ref_can (internal use) ( 116) – Lenze PLC Designer R3-x User Manual
Page 116: L_lcb_axis_ref_etc (internal use) ( 116), The l_lcb_logiccontrolbasic library
The L_LCB_LogicControlBasic library
L_LCB_AXIS_REF_CAN (internal use)
116
Lenze · Commissioning of Lenze drives · 1.3 EN - 06/2014
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Outputs
13.4
L_LCB_AXIS_REF_CAN (internal use)
• Bus system-specific extension of the FB
for the CAN bus system.
13.5
L_LCB_AXIS_REF_ETC (internal use)
• Bus system-specific extension of the FB
for the EtherCAT bus system.
eLogicDrive
0
Type of the connected controller
AxisDataDrive
L_LCB_AxisData
-
Machine parameters of the connected controller for
converting machine units to internal units.
Identifier
Data type
Initialisation
Information/possible settings
uiDeviceId
UINT
0
Station/node address at the used bus system
uiNetId
UINT
0
Network/master instance number of the used bus
system.
xCommunication
OK
BOOL
FALSE
Status of bus communication
FALSE No bus communication active
TRUE Bus communication available
eCommunication
State
0
Busstatus
AxisName
STRING
-
Axis name
Identifier
Data type
Initialisation Information/possible settings