Lenze PLC Designer R3-x - Manual (Page 35)

Lenze · Commissioning of Lenze drives · 1.3 EN - 06/2014
35
Working with the sample projects
Sample project with the "Actuator speed" application - Actuator Speed
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
• Button  selects the manual (manual jog) mode.
• In the control and status panel  the FB for actuating the controller is visualised.
Note: Activate button  to be able to operate the controller via the visualisation.
• Enable the controller via the xDriveEnable FB input to be able to define setpoints manually.
Note: Click the xDriveSetQsp button to activate quick stop.
For more information on the FB, please see the following section:  L_LCB_ActuatorSpeed
( 120)
 Select mode Control panel Activate control via visualisation