Apple Compressor (4.0) - Manual (Page 212)

Chapter 7 Advanced functions 212
The host address dialog appears.
3 In the host address dialog, do one of the following:
•
Select Host, complete the Host Name and IP Address fields, and click Add Host.
Note: You can also enter only the host name or the IP address and press the Tab
key. If a corresponding host name or IP address is found, the match is entered in the
field automatically.
•
Select “Host IP address range,” complete the Range fields, and click Add Range.
The hosts or host ranges appear in the Host table in the main Preferences window.
Important: Any changes you make to the Compressor preference settings take effect only when
you click OK. If you make changes but decide not to use them, click Cancel.
Preferences window
The Compressor Preferences window contains the following settings: