ADC Soneplex Broadband System - Manual (Page 21)

ADCP-61-471 • Issue 4 • June 2000 • Section 1: Introduction
Page 1-5
 2000, ADC Telecommunications, Inc.
3.9 Data Entry
Table 1-2 shows the different field types in the Craft Interface, and how to enter data in them.
A "toggle" field type means the user can press the space bar and "R" key to view and select
different options that are described. An "input" field type means the user must type an entry in
the field according to the parameters described. A "fixed" field is locked, and cannot be changed
by the user.
Table 1-2. Craft Interface Data Entry
FIELD STATUS
FLASHING HIGHLIGHTED FIELD TYPE OPTION DESCRIPTION
Yes Yes Toggle Press the
space bar
Toggles forward through field
options.
Press the
“R” key
Toggles backward through field
options.
Yes Yes Input Type any
character
Overwrites the character at the
cursor.
Press
Delete
Erases the character at the cursor.
Yes Yes Toggle or
Input
Use any
arrow key
• If no edit has been made: Moves
the cursor to the next field.
• If an edit has been made: Enters an
edit without saving it and moves
the cursor to another field.
Press
Enter once
If the arrow key has not been
pressed: Stops the edit mode and
enters the edit without saving it.
Yes No Toggle or
Input
Press
Enter once
If an edit has been made and Enter
has already been pressed once:
Pressing Enter again saves the edit.
No No Toggle or
Input
N/A • No edit has been made and the
cursor is no longer in that field or
• The edit has been saved using the
arrow keys and pressing Enter once
or
• The edit has been saved by
pressing Enter twice.
4 USING A TOP DOCUMENT
The procedures in this section are written in the Task Oriented Practice (TOP) format. The TOP
method of presenting information provides step-by-step instructions for the successful completion
of the indicated task. To find the instructions for performing enclosure installation, plug-in unit
installation and initial turn-up, and installation troubleshooting tasks, follow these steps:
1. Find the task to be performed in the Task Index List (IXL-001).