Enable authentication, Syntax, Parameters – Allied Telesis AT-S63 User Manual

Page 540: Description, Example

Text mode
Original mode

Chapter 37: TACACS+ and RADIUS Commands

540

ENABLE AUTHENTICATION

Syntax

enable authentication

Parameters

None.

Description

This command enables TACACS+ or RADIUS manager account
authentication on your switch. To select an authenticator protocol, refer to
“SET AUTHENTICATION” on page 542.

Note

If you are using the RADIUS authentication protocol for 802.1x Port-
based Network Access Control but not for manager account
authentication, you do not need to use this command. You can leave
the RADIUS manager account feature disabled. The switch still has
access to the RADIUS configuration information for 802.1x port-
based access control.

Example

The following command enables authentication on your switch:

enable authentication