Allied Telesis AT-S63 - Manual (Page 189)

AT-S63 Management Software Command Line Interface User’s Guide
189
local 1 through local 7
An identifier to assign to specific
switches or groups of switches.
syslogformat Specifies the format of the generated messages. The
possible options are:
extended Messages include the date, time, and
system name. This is the default.
normal Messages do not include the date, time,
and system name.
Description
This command creates an output definition that specifies how event log
messages that match the filters are processed. After you create the output
definition with CREATE LOG OUTPUT, use “ADD LOG OUTPUT” on
page 186 to create filters for the output definition.
Examples
The following command creates output definition number 10, sends the
messages to a syslog server in normal format with a facility code of 6:
create log output=10 destination=syslog server=149.65.10.99
facility=local6 syslog format=normal
The following command creates output definition number 18 and sends all
of the messages to the syslog server in extended format:
create log output=18 destination=syslog server=149.65.10.101
16 Local use 0 All other modules and events.
22 Local use 6 Physical interface and data link
events from the following modules:
PCFG (port configuration), PMIRR
(port mirroring), PTRUNK (port
trunking), STP, and VLANs.
23 Local use 7 System events related to major
exceptions.
Table 3. Default Syslog Facilities
Facility
Number
Syslog Protocol
Definition
Mapped Event Log Modules and
Events