Allied Telesis AT-S63 - Manual (Page 131)

AT-S63 Management Software Command Line Interface User’s Guide
131
DELETE SWITCH TRUNK
Syntax
delete switch trunk= name [tgid= id_number ] port= port
Parameters
trunk Specifies the name of the static port trunk to be
modified.
tgid Specifies the ID number of the static port trunk to be
modified. This parameter is optional.
port Specifies the port to be removed from the existing port
trunk. You can specify more than one port at a time.
Description
This command removes ports from a static port trunk. To completely
remove a port trunk from a switch, see “DESTROY SWITCH TRUNK” on
page 132.
Caution
Disconnect all data cables from the ports of the trunk on the switch
before using this command. Removing a port from a port trunk
without first disconnecting the cables may result in loops in your
network topology, which can produce broadcast storms and poor
network performance.
Example
The following command removes port 9 from a port trunk called
Dev_trunk:
delete switch trunk=Dev_trunk port=9