Allied Telesis AT-S63 - Manual (Page 316)

Chapter 22: SNMPv3 Commands
316
CREATE SNMPV3 NOTIFY
Syntax
create snmpv3 notify= notify tag= tag [type=trap|inform]
[storagetype=volatile|nonvolatile]
Parameters
notify Specifies the name of an SNMPv3 Notify Table
entry, up to 32 alphanumeric characters.
tag Specifies the notify tag name, up to 32
alphanumeric characters. This is an optional
parameter.
type Specifies the message type. This is an optional
parameter. The options are:
trap Trap messages are sent, with no
response expected from another entity
(NMS or manager). This is the default.
inform Inform messages are sent, with a
response expected from another entity
(NMS or manager).
storagetype Specifies the storage type of this table entry. This is
an optional parameter. The options are:
volatile Does not allow you to save the table
entry to the configuration file on the
switch. This is the default.
nonvolatile Allows you to save the table entry to
the configuration file on the switch.
Description
This command creates an SNMPv3 Notify Table entry.
Examples
The following command creates the SNMPv3 Notify Table entry called
“testengtrap1” and the notify tag is “testengtag1.” The message type is
defined as a trap message and the storage type for this entry is nonvolatile
storage.
create snmpv3 notify=testengtrap1 tag=testengtag1 type=trap
storagetype=nonvolatile