Save log, Syntax, Parameters – Allied Telesis AT-S63 User Manual
Page 196
Chapter 14: Event Log Commands
196
SAVE LOG
Syntax
save log[=permanent|temporary] filename=
filename
.log [full]
[module=
module
] [reverse] [severity=all|
severity
]
[overwrite]
Parameters
log
Specifies the source of the events you want to save
to the log file. The options are:
permanent
Permanent (nonvolatile) memory.
Saves events stored in nonvolatile
memory, which can contain up to
2,000 events.
temporary
Temporary memory. Saves events
stored in temporary memory, which
can contain up to 4,000 events. This is
the default if you do not specify the
“permanent” option.
filename
Specifies the filename for the log. The name can be
up to 16 alphanumeric characters, followed by the
extension ”.log.” Spaces are allowed. The filename
must be enclosed in quotes if it contains spaces.
Otherwise, the quotes are optional.
full
Specifies the amount of information saved to the log.
Without this option, the log saves only the time,
module, severity, and description for each entry. With
it, the log also saves the filename, line number, and
event ID.
module
Specifies the AT-S63 module whose events are to be
saved. For a list of modules, refer to Table 4 on
page 202.
reverse
Specifies the order of the events in the log. Without
this option, the events are saved oldest to newest.
With this option, the events are saved newest to
oldest.
severity
Specifies the severity of events to be filtered. The
options are:
all
Saves events of all severity levels. This is
the default