Allied Telesis AT-S63 - Manual (Page 303)

AT-S63 Management Software Command Line Interface User’s Guide
303
CLEAR SNMPV3 ACCESS
Syntax
clear snmpv3 access= access [securitymodel=v1|v2c|v3]
[securitylevel=noauthentication|authentication|
privacy] readview writeview notifyview
Parameters
access Specifies the name of the security group, up to 32
alphanumeric characters.
securitymodel Specifies the security model. The options are:
v1 Associates the Security Name, or User
Name, with the SNMPv1 protocol.
v2c Associates the Security Name, or User
Name, with the SNMPv2c protocol.
v3 Associates the Security Name, or User
Name, with the SNMPv3 protocol.
securitylevel Specifies the security level. The options are:
noauthentication This option provides no authentication protocol and
no privacy protocol.
authentication This option provides an
authentication protocol, but no
privacy protocol.
privacy This option provides an
authentication protocol and the
privacy protocol.
readview Specifies a Read View Name that allows the users
assigned to this security group to view the
information specified by the View Table entry. This
is an optional parameter.
writeview Specifies a Write View Name that allows the users
assigned to this security group to write, or modify,
the information in the specified View Table. This is
an optional parameter.
notifyview Specifies a Notify View Name that allows the users
assigned to this security group to send traps
permitted in the specified View. This is an optional