Set password manager, Syntax, Parameters – Allied Telesis AT-S63 User Manual

Page 51: Description, Example

Text mode
Original mode

AT-S63 Management Software Command Line Interface User’s Guide

SET PASSWORD MANAGER

Syntax

set password manager

Parameters

None.

Description

This command sets the manager’s password. Logging in as manager
allows you to view and change all switch parameters. The default
password is “friend.” The password can be from 0 to 16 alphanumeric
characters. Allied Telesyn recommends that you avoid special characters,
such as spaces, asterisks, or exclamation points because some web
browsers do not accept them in passwords. The password is case
sensitive.

Example

The following command changes the manager’s password:

set password manager

Follow the prompts to enter the new password.