Allied Telesis AT-S63 - Manual (Page 117)

AT-S63 Management Software Command Line Interface User’s Guide
117
SET SWITCH PORT RATELIMITING
Syntax
set switch port= port
[bcastratelimiting=yes|no|on|off|true|false|enabled|
disabled] [bcastrate=
value ]
[mcastratelimiting=yes|no|on|off|true|false|enabled|
disabled] [mcastrate=
value ]
[unkucastratelimiting=yes|no|on|off|true|false|enabled|
disabled] [unkucastrate=
value ]
Parameters
port Specifies the port you want to configure. You can
specify more than one port at a time, but the ports
must be of the same medium type. For example,
you cannot configure twisted pair and fiber optic
ports with the same command. You can specify the
ports individually (for example, 5,7,22), as a range
(for example, 18-23), or both (for example, 1,5,14-
22).
ratelimit Specifies the number of ingress packets the switch
ports accept each second. This setting applies all
packet types that have their rate limit enabled. The
options are:
auto Returns the parameter to its default setting
of 1.
value Specifies the number of packets in the
range of 0 to 262,143.
bcastratelimiting Enables or disables rate limit for ingress broadcast
packets. The options are:
yes, on, true, enabled Activates broadcast
packet rate limit on the
port. The options are
equivalent.
no, off, false, disabled Deactivates broadcast
packet rate limit on the
port. The options are
equivalent.
mcastratelimiting Enables or disables rate limit for ingress multicast
packets. The options are:
yes, on, true, enabled Activates multicast