Allied Telesis AT-S63 - Manual (Page 210)

Chapter 15: Classifier Commands
210 Section I: Basic Features
CREATE CLASSIFIER
Syntax
create classifier= idnumber [description=“ string ”]
[macdaddr= macaddress ] [macsaddr= macaddress ]
[ethformat=ethI-untagged-ethII-tagged|802.2-
untagged|802.2-tagged] [priority=
value ]
[vlan= name |1..4094]
[protocol=ip|arp|rarp| number ] [iptos= value ]
[ipdscp= value [ipprotocol= protocol | number ]
[ipdaddr= ipaddress / mask ] [ipsaddr= ipaddress / mask ]
[tcpsport= value ] [tcpdport= value ] [udpsport= value ]
[udpdport= value ] [tcpflags=[urg|ack|psh|rst|syn|fin]
Parameters
classifier Specifies the ID number of the classifier. The number can
be from 1 to 9999. Each classifier must be assigned a
unique ID number. This parameter is required.
description Specifies a description of the classifier. A description can
be up to fifteen alphanumeric characters. Spaces are
allowed. If it contains spaces, it must be enclosed in double
quotes. Otherwise, the quotes are optional.
macdaddr Specifies a destination MAC address. The address can be
entered in either of the following formats:
xx:xx:xx:xx:xx:xx or xxxxxxxxxxxx
macsaddr Specifies a source MAC address. The address can be
entered in either of the following formats:
xx:xx:xx:xx:xx:xx or xxxxxxxxxxxx
ethformat Specifies the type of Ethernet frame that needs to be
classified. The options are:
ethII-untagged
ethII-tagged
802.2-untagged
802.2-tagged
priority Specifies the user priority level in a tagged Ethernet frame.
The value can be 0 to 7.
vlan Specifies a tagged or port-based VLAN by its name or VID
number.