Allied Telesis AT-S63 - Manual (Page 179)

AT-S63 Management Software Command Line Interface User’s Guide
179
UPLOAD
Syntax
upload method=[tftp|xmodem|remoteswitch|local]
[[srcfile=[flash:|cflash:][appblock|switchcfg|
filename ]|
[file=a[flash:|cflash:][appblock|switchcfg| filename ]]
destfile=[flash:|cflash:] filename server= ipaddress
switchlist= switches verbose=[yes|no|on|off|true|false]
Parameters
method Specifies the method of the upload. The options are:
tftp Specifies a TFTP download. To use this
option, there must be a network node with
TFTP server software. The file to download
onto the switch must be stored on the TFTP
server. You can use the TFTP option from
either a local or Telnet management
session.
xmodem Specifies an Xmodem download via a local
management session. This download
method is only available from a local
management session.
remoteswitch Specifies an enhanced stacking upload to a
remote switch.
local Specifies the transfer of an image file from
the switch’s file system to the appblock area.
srcfile or file Specifies the name of the file you are uploading from the
switch. If the name contains spaces, enclose the name in
quotes. The options are:
appblock Specifies an image file upload.
switchcfg Specifies a configuration file upload.
filename Specifies any file type.
destfile Specifies a filename for the file when saved on the TFTP
server. If the name contains spaces, enclose the name in
quotes. This parameter is used with a TFTP or LOCAL
upload.
server Specifies the IP address of the network node containing the
TFTP server software. This parameter is used with a TFTP