Allied Telesis AT-S63 - Manual (Page 180)

Chapter 13: File System Commands
180
upload.
switchlist Specifies the switches in an enhanced stack to which to
upload the software image or configuration file from the
master switch. To view the switches in an enhanced stack,
see “SHOW REMOTELIST” on page 100. This parameter
is used with the REMOTESWITCH parameter. You can
specify more than one switch at a time (for example, 1,3,4).
verbose Specifies whether to display details of the upload operation.
This option can only be used with the REMOTESWITCH
upload method. The options are:
yes, on, true Display the upload details. The options
are equivalent.
no, off, false Do not display the upload details. The
options are equivalent.
Description
This command uploads any of the following types of files from a switch to
a management station, TFTP server, compact flash card, or remote switch
through enhanced stacking:
ˆ AT-S63 software image
ˆ Configuration file
ˆ Public key certificate
ˆ Public key certificate enrollment request
ˆ Encryption key
This command can upload files as follows:
ˆ From a management station to a slave or master switch using
Xmodem or TFTP.
ˆ From a master switch to other switches in an enhanced stack.
ˆ From a management station to a compact flash card in a switch.
The METHOD parameter states the type of upload. There are four
possible types of uploads. A TFTP upload uses the TFTP client software
on the switch to upload a file from the switch to a TFTP server on your
network. You can perform this type of upload from either a local or Telnet
management session.
The XMODEM upload method uses the Xmodem utility to upload a file
from the switch to a terminal or computer with a terminal emulator program
connected to the serial terminal port on the switch. This type of upload
must be performed from a local management session.