beautypg.com

Disable ip remoteassign, Syntax, Parameters – Allied Telesis AT-S63 User Manual

Page 34: Description, Example

background image

Chapter 3: Basic Switch Commands

34

DISABLE IP REMOTEASSIGN

Syntax

disable ip remoteassign

Parameters

None.

Description

This command deactivates the DHCP and BOOTP client software on the
switch. This command is equivalent to “DISABLE DHCPBOOTP” on
page 33. The default setting for the client software is disabled.

To activate the DHCP and BOOTP client software, refer to “ENABLE
BOOTP” on page 36 or “ENABLE IP REMOTEASSIGN” on page 38.

Example

The following command deactivates the DHCP and BOOTP client
software:

disable ip remoteassign

See also other documents in the category Allied Telesis Computer hardware: