Allied Telesis AT-S63 - Manual (Page 312)

Chapter 22: SNMPv3 Commands
312
CREATE SNMPV3 COMMUNITY
Syntax
create snmpv3 community index= index
communityname= communityname securityname= securityname
transporttag= transporttag
[storagetype=volatile|nonvolatile]
Parameters
index Specifies the name of this SNMPv3 Community
Table entry, up to 32 alphanumeric characters.
communityname Specifies a password for this community entry, up to
32 alphanumeric characters.
securityname Specifies the name of an SNMPv1 and SNMPv2
user, up to 32 alphanumeric characters.
transporttag Specifies the transport tag, up to 32 alphanumeric
characters. This is an optional parameter.
storagetype Specifies the storage type of this table entry. This is
an optional parameter. The options are:
volatile Does not allow you to save the table entry to the
configuration file on the switch. This is the default.
nonvolatile Allows you to save the table entry to the
configuration file on the switch.
Description
This command creates an SNMPv3 Community Table entry.
Examples
The following command creates an SNMP community with an index of
1213 and a community name of “sunnyvale145.” The user is “chitra34”
and the transport tag is “testengtag.” The storage type for this community
is nonvolatile storage.
create snmpv3 community index=1213
communityname=sunnyvale145 securityname=chitra34
transporttag=testengtag storagetype=nonvolatile
The following command creates an SNMP community with an index of 95
and a community name of “12sacramento49.” The user is “regina” and the
transport tag “trainingtag.” The storage type for this community is