Allied Telesis AT-S63 - Manual (Page 135)

135
Chapter 10
LACP Commands
This chapter contains the following commands:
ˆ “ADD LACP PORT” on page 136
ˆ “CREATE LACP AGGREGATOR” on page 137
ˆ “DELETE LACP PORT” on page 139
ˆ “DESTROY LACP AGGREGATOR” on page 140
ˆ “DISABLE LACP” on page 141
ˆ “ENABLE LACP” on page 142
ˆ “SET LACP AGGREGATOR” on page 143
ˆ “SET LACP PRIORITY” on page 144
ˆ “SET LACP STATE” on page 145
ˆ “SHOW LACP” on page 146
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
For background information and guidelines on LACP, refer to
Chapter 7, “Static and LACP Port Trunks” in the AT-S63
Management Software Menus Interface User’s Guide.