Allied Telesis AT-S63 - Manual (Page 515)

AT-S63 Management Software Command Line Interface User’s Guide
515
SET PKI CERTIFICATE
Syntax
set pki certificate=" name "
[trusted=yes|no|on|off|true|false]
[type=ca|ee|self]
Parameters
certificate Specifies the certificate name whose trust or type you want to
change. The name is case sensitive. If the name contains
spaces, it must be enclosed in quotes.
trusted Specifies whether or not the certificate is from a trusted CA.
The options are:
yes, on, true Specifies that the certificate is from a trusted
CA. This is the default. The options are
equivalent.
no, off, false Specifies that the certificate is not from a
trusted CA. The options are equivalent.
type Specifies a type for the certificate. The options are:
ca Tags the certificate as a CA certificate.
ee Tags the certificate as belonging to another end entity
(EE). This is the default.
self Tags the certificate as its own.
Description
This command changes the level of trust and type for a certificate in the
switch’s certificate database. To list the certificates in the database, refer
to “SHOW PKI CERTIFICATE” on page 520.
The TRUSTED parameter specifies whether the certificate is from a
trusted CA. The default is TRUE. Only self-signed root CA certificates are
typically set to be automatically trusted, and only after the user has
checked the certificate’s fingerprint and other details using “SHOW PKI
CERTIFICATE” on page 520.
The TYPE parameter specifies the certificate type. If CA is specified, the
switch tags this certificate as a CA certificate. If ENDENTITY or EE is
specified, the switch tags the certificate to indicate that it belongs to an end
entity. If SELF is specified, the switch tags the certificate as its own. The
default is ENDENTITY.