Campbell Scientific CR3000 Micrologger - Manual (Page 221)

Section 7. Installation
221
'One Minute Data Table
DataTable (OneMinTable,true,-1)
OpenInterval 'sets interval same as found in CR510
DataInterval (0,1,Min,10)
Totalize (1, KWHH,FP2,0)
Sample (1, KWHHold,FP2)
Totalize (1, KvarH,FP2,0)
Sample (1, KVarHold,FP2)
Sample (1, StationID,FP2)
EndTable
'Clock Set Record Data Table
DataTable (ClockSetRecord,True,-1)
Sample (7,ClkSet(),FP2)
EndTable
'Subroutine to convert date formats (day-of-year to month and date)
Sub DOY2MODAY
'Store Year, DOY, Hour, Minute and Second to Input Locations.
Year = InStringSplit(1)
DOY = InStringSplit(2)
Hour = InStringSplit(3)
Minute = InStringSplit(4)
Second = InStringSplit(5)
uSecond = 0
'Check if it is a leap year:
'If Year Mod 4 = 0 and Year Mod 100 <> 0, then it is a leap year OR
'If Year Mod 4 = 0, Year Mod 100 = 0, and Year Mod 400 = 0, then it
'is a leap year
LeapYear = 0
'Reset leap year status location
LeapMOD4 = Year MOD 4
LeapMOD100 = Year MOD 100
LeapMOD400 = Year MOD 400
If LeapMOD4 = 0 Then Leap4 = True Else Leap4 = False
If LeapMOD100 = 0 Then Leap100 = True Else Leap100 = False
If LeapMOD400 = 0 Then Leap400 = True Else Leap400 = False
If Leap4 = True Then
LeapYear = True
If Leap100 = True Then
If Leap400 = True Then
LeapYear = True
Else
LeapYear = False
EndIf
EndIf
Else
LeapYear = False
EndIf